Sine wave inverter 24V-220V - 600W Studer
IJ402

Technical data :

• Nominal input voltage : 24 V
• Input voltage range : 21 –32 V (44 V max.)
• Continuous power @ 25°C : 500 VA
• Power 30 min. @ 25°C : 600 VA
• Power 5 min. @ 25°C : 675 VA
• Power 5 sec. @ 25°C : 1200 VA
• Max asymmetrical load : 300 VA
• Short circuit current 2s (output) : 5.7 A
• Output voltage True sine 230Vac : 0 / -10%
• Frequency 50Hz ± 0.05% (Crystal control)
• Distortion THD (on resistive load) < 5% (@ Pnom)
• Consumption in « Stand-by » mode : 0.4 W
• Consumption « ON » @ no load : 8.5 W
• Maximum efficiency : 94%
• Max continuous Cos ? 0.1 – 1 up to 500 VA
• Load detection Adjustable: 1 ? 20 W
• Overheating protection (+/-5°C) Shut down @ 75 °C – Auto-restart @ 70°C
• Overload protection : Automatic disconnection with 2 time restart attempt
• Short circuit protection : Automatic disconnection with 2 time restart attempt
• Reverse polarity protection : Protected by internal fuse
• Back feed protection : Not protected
• Battery deep discharge protection Shut off @ 0.87 x Unom – Automatic restart @ Unom
• Over voltage shut down Shut off @ >1.33 x Unom - Automatic restart @ < Umax
• Acoustic warning Before low battery or overheating disconnection
• Cable length(Battery / AC out) 1.5 m / 1 m
• Noise > 45 dB (Ventilation)
• Operating temperature -20°C up to +50°C
• Approx. output power derating -1.5%/°C since +25°C
• IP protection index IP 30 conforms to DIN 40050
• Forced ventilation : From 45°C ± 5°C
• Required battery capacity > 5 x Pnom/Unom (recommended value in Ah)
• Weight & dimensions : 4.5 kg – 142 mm x 240 mm x 84 mm
• Warranty : 2 years
• E norm ECE-R 10 (E24) certification for 12 and 24 V models
• EC conformity compliance EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2,
• Dir. 89/336/EEC, LVD 73/23/EEC