This submerged pump is especially designed for drillings of 100mm of diameter and an installation with a maximum depth of 70m. The pump can turn dry without being damaged and supports a dry automatic priming when the water becomes again available.
Some booster rockets are available. They allow to increase the flow of water daily newspaper until 30% while making earlier start the pump and to stop later. They also protect the pump against the overcurrents and overpressures. Model LCB75 ensures basic protection and can be connected to a floating switch (filling of tank e.g.), moreover it is equipped with probes and electronic circuits making it possible to control the level of the tablecloth of water and to stop the pump when the level is too low. Function with the wire of the sun or on battery.
| Total manometric height |
Medium flow (liter/hour) |
Required solar panel |
| 10 |
435 |
2 x 40Wc |
| 20 |
410 |
2 x 40Wc |
| 30 |
391 |
2 x 60Wc |
| 40 |
380 |
2 x 60Wc |
| 50 |
367 |
2 x 65 Wc |
| 60 |
345 |
2 x 65 Wc |
| 70 |
310 |
2 x 65 Wc |
Technical characteristics
- Pump with diaphragm with 3 rooms
- Flow until 422 liters/hour with a maximum height of 70 meters
- Cam: 3 degrees
- Permanent magnet engine (P/N 11-175-00) with thermal protection
- Nominal voltage : 24Vcc
- Maximum height of repression : 70m
- Maximum depth of immersion : 30m
- Internal by-pass avoiding the hydraulic overloads if the pump is immersed too deeply or if the circuit is blocked (between 7,2 and 7,6 bars)
- Output : connection for a pipe of internal diameter 13mm
- Input : roast out of stainless steel (mesh 50)
- Height : 30,5 cm
- Diameter : 9,5 cm
- Weight : 2,7 kg
- Guarantee : 1 year
Rigid solar panels
