Sine wave inverter 12V-220V - 275W Studer
IJ201

Technical characteristics

• Nominal input voltage 12 V
• Input voltage range 10.5 – 16 V (24 V max.)
• Continuous power @ 25°C 200 VA
• Power 30 min. @ 25°C 275 VA
• Power 5 min. @ 25°C 350 VA
• Power 5 sec. @ 25°C 450 VA
• Max asymmetrical load 150 VA
• Short circuit current 2s (output) 2.3 A
• Output voltage True sine 230 Vac 0 / -10%
• Frequency 50Hz ± 0.05% (Crystal control)
• Distortion THD (on resistive load) < 5% (@ Pnom.)
• Consumption Stand-by 0.3 W
• Consumption « ON » @ no load 1.9 W
• Maximum efficiency 93% 94%
• Max continuous Cos ? 0.1 – 1 up to 200 VA
• Overheating protection (+/-5°C) Shut down @ 75 °C – Auto-restart @ 70°C
• Overload protection Automatic disconnection with 2 time restart attempt
• Short circuit protection Automatic disconnection with 2 time restart attempt
• Reverse polarity protection Protected by internal fuse
• Back-feeding protection Not protected
• Battery deep discharge protection Shut off @ 0.87 x Unom
• Automatic restart @ Unom
• Over voltage shut down Shut off @ >1.33 x Unom – Automatic restart @ < Umax
• Acoustic warning Before low battery or overheating disconnection
• Cable length (Battery / AC out) 1.2 m / 1 m
• Noise < 45 dB (fans)
• Operating temperature -20°C up to +50°C
• Approx. output power derating -1.5%/°C since +25°C
• IP protection index IP 30 conforms to DIN 40050
• Forced ventilation From 45°C ± 5°C
• Required battery capacity > 5 x Pnom/Unom (recommended value in Ah)
• Weight 2.4 kg
• Dimensions 142 mm x 163 mm x 84 mm
• Warranty 2 years
• E norm ECE-R 10 (E24) certification for 12 and 24V models
• EC conformity compliance EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2,
• Dir. 89/336/EEC, LVD 73/23/EEC